2018 HHD Catalog

Filter Housings Filter housings are manufactured from the highest quality, NSF listed, FDA grade reinforced polypropylene. They are sealed with a top seated O-ring and square thread closure. All caps come with four mounting bosses for rigid bracket mounting. Standard 10”Housing

High Temperature Hot Housing Dimensions: 12 1/4” H x 5 3/8”OD Flow Rate: (Cartridge Dependent) Max. Pressure: 200 PSI Max. Temp: 200°F Inlet/Outlet: 3/4” FPT Color: Orange Replacement O-Ring: Part# OR-8

HO1012PR

Dimensions: 11 3/4”H x 4 3/8”OD Flow Rate: (Cartridge Dependent) Max. Pressure: 125 PSI Max. Temp: 125°F Replacement O-Ring: Part# OR-4 Mounting Bracket: SMB Spanner Wrench: SW

with pressure relief

Part No. HOH

HOW38

Inlet/ Outlet 1/4” FPT 3/8” FPT

10” Slimline High Heat Housing Dimensions: 12 1/4” H x 5 3/8”OD Flow Rate: (Cartridge Dependent) Max. Pressure: 125 PSI Max. Temp: 125°F Inlet/Outlet: 1/2” FPT Color: Black Replacement O-Ring: Part# 11551121

Part No.

Color

HOB

Blue/Black Blue/Black

Part No. DEV9104-60

HOB38

HOW

White/White 1/4” FPT White/White 3/8” FPT

HOW38

HOB1012PR

Blue/Black

1/2” FPT

HO2034PR

5”Housing Dimensions: 7” H x 4 3/8”OD Flow Rate: (Cartridge Dependent) Max. Pressure: 125 PSI Max. Temp: 125°F Inlet/Outlet: 1/4” FPT Color: White Replacement O-Ring: Part# OR-4

with pressure relief

20”Housing Flow Rate: (Cartridge Dependent) Max. Pressure: 125 PSI Max. Temp: 125°F Inlet/Outlet: 3/8” FPT

Part No. HO5

HO20B

HO20W

Replacement O-Ring

Use Spanner Wrench Use Bracket

Part No.

Color

Size

HO20B HO20W

Blue/Black

24” H x 7.28”OD OR-4

SW SW

HOCBRKT

White/White 22” H x 4 3/8”OD OR-4

SMB

HOB2034PR

Blue/Black

24” H x 7.28”OD OR-8

HOHSW HOCBRKT

Clear Housing Flow Rate: (Cartridge Dependent) Max. Pressure: 125 PSI Max. Temp: 100ºF

Double O-ring seals as used in pharmaceutical-grade filters. The first O-ring serves as a wiper and the second as a secure seal. In most cases, both O-rings seal and a double failure path is essentially impossible. Easy wrench on - easy wrench off with side sealing O-rings.

Replacement O-Ring: Part# OR-8 (HOC2034) Part# OR-4 (HOC)

HOC

Part No.

Size

Inlet/Outlet Use Spanner

Wrench Use Bracket

HOC

11 3/4” H x 4 3/8”OD 11 3/4” H x 4 3/8”OD 11 3/4” H x 4 3/8”OD 11 3/4” H x 4 3/8”OD 11 3/4” H x 4 3/8”OD

1/4” 3/8” 1/2” 3/4” 3/4”

SW SW SW SW SW

SMB SMB SMB

HOC38 HOC12

HOC2034

with pressure relief

HOC1034

SMBM SMBM

HOC1034PR

HOC2034

20” H x 4 3/8”OD

3/4”

HOHSW HOCBRKT (screws-MBS3)

Don’t forget a spanner wrench! See next page!

124

Phone: 800-443-4318 | www.HHDonline.com | info@HHDonline.com | Fax: 800-863-7041