2018 HHD Catalog

Strainers & Back Flow

Part No.

Description

BACK FLOW PREVENTER • Designed to prevent contamination of potable water supply due to back flow • Two independently acting check valves biased to a normally closed position • A normally open atmospheric port is located between the check valves • All components have a 100 mesh integral strainer screen at the inlet • Non-toxic, corrosion resistant, and approved for use with potable water • Suitable for supply pressures to 150 psi & water temperatures 33°F-130°F BF1022 Inlet/Outlet 1/4”Male Flare BACK FLOW PREVENTER Working pressures from 10-200 psi. Working temperature up to 130ºF. 3/8”Flared x 3/8”NPT connections. Atmospheric port for visual indication of secondary check leakage. BF1022B 3/8”NPT Inlet x 3/8” Flare Outlet BACK FLOW PREVENTER Series 7 uses two compact replaceable check modules. Temp. Range 33ºF-180ºF (0.5ºC-82ºC) continuous. Max. Working Pressure: 150 psi (10.3 bar) BF1024 3/8” Female Pipe Thread BACK FLOW PREVENTER Stainless steel, double ball valve. Meets commercial codes for beverage and soda systems. BFS Inlet/Outlet 1/4” Female Pipe Thread

Approved under ASSE 1022

Approved under

ASSE 1022

Approved under

ASSE 1024

BFS4MF4FF Inlet 1/4”Male Flare x 1/4” Female Flare Outlet BFSFF6MF6 Inlet 3/8”Female Flare x 3/8”Male Flare Outlet

BFSFP6MP6 Inlet 3/8” Female Pipe Thread x 3/8”Male Pipe Thread Outlet BFSMP4FP4 Inlet 1/4”Male Pipe Thread x 1/4” Female Pipe Thread Outlet BFSSMF4 Inlet/Outlet 1/4”Male Flare Single Check Valve BFSSMF6 Inlet/Outlet 3/8”Male Flare Single Check Valve BRASS STRAINER B23820.1 1/4” Inlet / Outlet Male Flare 3 1/2”L x 1”W

BFS Approved under ASSE 1032

5003064.004 Screen 01155.0000 Gasket BRASS STRAINER B23820.1A

5003064.004

B23820.1

1/4” Inlet / Outlet Male Flare 4 1/4”L x 1 1/8”W

23721.0000 Screen, Strainer 01155.0000 Gasket Y STRAINER • Very compact

23721.0000 B23820.1A

• Corrosion resistant • Maximum supply pressure: 300 PSI • 140 micron stainless steel screen • O-ring sealed quick clean out plug • Body & clean out plug are made of NSF approved grade acetal plastic Y Inlet/Outlet 1/4” FPT Y6 Inlet/Outlet 3/8” FPT LINE STRAINER • Rugged nylon housing and clear bowl are joined by a buttress thread • Easy cleaning in the field without removing the strainer from the line • No tools needed • 65 micron stainless steel screen • Inlet/Outlet- 1/4”MPT • Pressure Rating- 150 PSI • Made in USA Can be used alone or with our In-line filters or our filtration systems without additional fittings. S Inlet/Outlet 1/4”MPT

174

Phone: 800-443-4318 | www.HHDonline.com | info@HHDonline.com | Fax: 800-863-7041