HHD 2019 CATALOG

Regulators & Reducers

Water Regulators

The perfect solution for fluctuating water pressure. Adjust to constant flow rate, then adjust machine timer.

Pressure Gauge

WRB Inlet/Outlet 1/4” FPT

PGB 1/8”MPT REAR MOUNT

• Adjustment Range: 0-100 PSI • Pre-Set: 50 PSI • Number of Outlet Ports: 3 • Max Inlet Pressure: 250 PSI

• Adjustment Range: 0-125 PSI • Pre-Set: 50 PSI • Number of Outlet Ports: 3 • Max Inlet Pressure: 300 PSI

WR Inlet/Outlet 1/4” FPT

Pressure Gauge

PG 1/4”MPT BOTTOM MOUNT

183-150-01 Inlet/Outlet 3/8”Barb

®

• Pre-Set: 50 PSI • Number of Outlet Ports: 2

Pressure Gauge w/ Pointer

PG2P 1/8”MPT BOTTOM MOUNT

183-150NF w/o Fittings Inlet/Outlet 1/2”NPT

®

• Pre-Set: 50 PSI • Number of Outlet Ports: 2

Water Hammer

WH4F

Part No.

Size

WH4F WH4C WH6C

1/4”Male Flare

334G Pressure

Use on pressure faucet and brewers with back flow valve

1/4”Comp 3/8”Comp

• Adjustment Range: 10-100 PSI • Number of Outlet Ports: 1 • Max Inlet Pressure: 200 PSI

Regulator w/Gauge Inlet/Outlet 3/8”FPT WR26 Inlet/Outlet 1/4” FPT

Regulates high pressure or spikes to a +/- 10% 42 PSI Inlet/Outlet 1/4”quick connect. Flow rate1.5GPM at 100 PSI. Burst pressure: 450 PSI. Max working pressure: 150 PSI Regulates high pressure or spikes to a +/- 10% 42 PSI Inlet/Outlet 1/4”quick connect. Flow rate1.5GPM at 100 PSI. Burst pressure: 450 PSI. Max working pressure: 150 PSI In-line Pressure Reducer In-line Pressure Reducer

• Adjustment Range: 10-125 PSI • Pre-Set: 300 PSI • Number of Outlet Ports: 1 • Max Inlet Pressure: 300 PSI

PRV42Q

Repair Kit (Used for WR26)

26ARK

IPRV42

Pressure Reducing Leak Stop Valve The Pressure Reducing Leak Stop valve is performing both leakage protecting and pressure reducing work in a device. The minimized fitting type pressure reducing valve is unified into a Leak Stop valve and reduce inlet water pressure by 40psi.

Working pressure: 150PSI Reduced pressure: 42psi +/- 10% Port type: 1/4”fitting - 1/4”fitting Shut down time: 1 min. from water contact

Flow rate: 1.5 GPM Working temperature: 33~104ºF Dimension: 2.7”x 2.4”x 2.9” (in) Burst pressure: 250 PSI Max working pressure: 150 PSI Tested up to 300 PSI

Part No. PRLSV

PRLSV

174

Phone: 800-443-4318 | www.HHDonline.com | info@HHDonline.com | Fax: 800-863-7041