2023-2024 HHD Catalog

Electrical Testers

DCM

DIGITAL CLAMP METER W/ CARRY CASE & TEST LEADS

• Clamp size: Opening 30mm (1.2”) approx • AC Current: 50-60Hz (TRMS AAC) • AC Voltage Bandwidth: 50-60Hz (TRMS VAC) • Battery: One 9V Battery

INPUT LIMITS FUNCTION

MAXIMUM INPUT

A

400A DC/AC 600V DC/AC 250V DC/AC 250V DC/AC

V DC, V AC

FREQUENCY, RESISTANCE, DIODE,CONTINUITY, CAPACITANCE TEST

TEMPERATURE (°C/°F)

INCLUDES: • K-Type Temperature probe • Temp range -58°F - 399°F • Probe can be used to measure air or gas temperatures. Can be attached or embedded into objects. • Comes with carrying case

PIT

DMULTI

TLT

TWIN LEAD TESTER

PLUG-IN TESTER

DIGITAL MULTIMETER

• DC Voltage: 200mV-1,000V • AC Voltage: 200V-750V • DC Current: 200 ohm A-10A • Resistance: 2,000K ohm -2M • 9V battery included

• 19 ranges, 6 functions • Transistor test (hFH) • 3.5 Digit LCD display • Dimensions: 5”H x 2.75”W x 1”D

• Glow indicator • 90 - 250 V • Hi-voltage tester gives positive checks on voltages from 90 -250V AC/DC

Gives instant display of outlet wiring condition for any standard 110V outlet.

• Diode test • Polarity indicator • Overload protection • Test leads included

ST

VTS

COMBINATION CIRCUIT TESTER

4 PIECE VOLTAGE TESTER SET

• 90 - 250V • Pocket clip • Clips on shirt pocket • A handy Hi-voltage tester and pocket screwdriver

• 90-600 Volts AC • 6-12 Volts DC

Lifetime Warranty

SAN3115

SAN3000

SAN3315

SAN3215

AC SENSOR 3115

ULTIMATE AC SENSOR 3000 Voltage Range: 50-1000Volts AC The Santronics Ultimate AC Sensor is a hand-held device for determining the presence or absence of 50-600 volts AC in insulated wires and electrical systems. • CAT III & CAT IV

DC DETECTOR 3315

LOW AC LOCATOR 3215 Voltage Range: 24-90Volts AC The Low AC Locator is a high tech device for determining the presence or absence of 24-90 volts AC in an electrical or electronic system. • CAT III & CAT IV

The Santronics AC Sensor has been selected by the OSHA Electrical Technical Equipment Committee as the only instrument of its type for use by OSHA compliance officers to identify and cite electrical hazards of 50 volts or more. • CAT III & CAT IV

Voltage Range: 6-50 DC The DC Detector can be used to troubleshoot any DC circuit with voltage ranging from 6-50 volts DC. The DC Detector features an LED that never burns out, a loud buzzer, and a sharp, rust proof, stainless steel tip for penetrating insulated wires.

209

ELECTRICAL |

HOLIDAY HOUSE DISTRIBUTING

Made with FlippingBook Learn more on our blog