2022 Catalog

Regulators & Reducers

Water Regulators

The perfect solution for fluctuating water pressure. Adjust to constant flow rate, then adjust machine timer.

PRESSURE GAUGE

PGB

Inlet/Outlet - 1/4” FPT

WRB

Inlet/Outlet - 1/4” FPT • Adjustment Range: 0-125 PSI • Pre-Set: 50 PSI • Number of Outlet Ports: 3 • Max Inlet Pressure: 300 PSI • Adjustment Range: 0-100 PSI • Pre-Set: 50 PSI • Number of Outlet Ports: 3 • Max Inlet Pressure: 250 PSI

1/8”MPT - REAR MOUNT

PRESSURE GAUGE

PG

WR

1/4”MPT - BOTTOM MOUNT

PRESSURE GAUGE W/ POINTER

PG2P

183-150-01

®

Inlet/Outlet - 3/8”Barb

1/8”MPT - BOTTOM MOUNT

• Pre-Set: 50 PSI • Number of Outlet Ports: 2

WATER HAMMER

WH4F

183-150NF

w/o Fittings Inlet/Outlet - 1/2”NPT

Use on pressure faucet and brewers with back flow valve Helps to eliminate shock waves generated in piping systems by sudden on/off changes in flow.

®

Part No.

Size

• Pre-Set: 50 PSI • Number of Outlet Ports: 2

WH4F WH4C WH6C

1/4”Male Flare

• Polypropylene piston • Temperature Range: 33°F to 180°F • Maximum working pressure: 350 psi

1/4”Comp 3/8”Comp

334G

Pressure Regulator w/Gauge Inlet/Outlet - 3/8” FPT

• Adjustment Range: 10-100 PSI • Number of Outlet Ports: 1 • Max Inlet Pressure: 200 PSI

Regulates high pressure or spikes to a+/- 10%42 PSI Inlet/Outlet: 1/4”quick connect. Flow rate: 1.5GPM at 100 PSI. Burst pressure: 450 PSI. Max working pressure: 150 PSI MOUNTABLE IN-LINE PRESSURE REDUCER Regulates high pressure or spikes to a+/- 10%42 PSI Inlet/Outlet: 1/4”quick connect. Flow rate: 1.5GPM at 100 PSI. Burst pressure: 450 PSI. Max working pressure: 150 PSI IN-LINE PRESSURE REDUCER

WR26

Inlet/Outlet - 1/4” FPT

• Adjustment Range: 10-125 PSI • Pre-Set: 300 PSI • Number of Outlet Ports: 1 • Max Inlet Pressure: 300 PSI

PRV42Q

REPAIR KIT (USED FOR WR26)

26ARK

IPRV42

Pressure Reducing Leak Stop Valve The Pressure Reducing Leak Stop valve is performing both leakage protecting and pressure reducing work in one device. The minimized fitting type pressure reducing valve is unified into a Leak Stop valve and reduces inlet water pressure by 40psi.

Flow rate:

1.5 GPM 33~104ºF

Working temperature: Dimension: Burst pressure: 250 PSI Max working pressure: 150 PSI Tested up to 300 PSI

Working pressure: Reduced pressure: Port type: Shut down time:

150PSI

2.7”x 2.4”x 2.9” (in)

42psi +/- 10%

1/4”fitting - 1/4”fitting 1 min. from water contact

PRLSV

96

Phone: 800-443-4318 | www.HHDonline.com | info@HHDonline.com | Fax: 800-863-7041