2018 HHD Catalog

Regulators & Reducers

Water Regulators The perfect solution for fluctuating water pressure. Adjust to constant flow rate, then adjust machine timer.

• Adjustment Range: 0-100 PSI • Pre-Set: 50 PSI • Number of Outlet Ports: 3 • Max Inlet Pressure: 250 PSI

WRB Inlet/Outlet 1/4” FPT

PGB 1/8”MPT REAR MOUNT

Pressure Gauge

• Adjustment Range: 0-125 PSI • Pre-Set: 50 PSI • Number of Outlet Ports: 3 • Max Inlet Pressure: 300 PSI

Pressure Gauge

WR Inlet/Outlet 1/4” FPT

PG 1/4”MPT BOTTOM MOUNT

183-150-01 Inlet/Outlet 3/8” Barb

Pressure Gauge w/ Pointer

PG2P 1/8”MPT BOTTOM MOUNT

• Pre-Set: 50 PSI • Number of Outlet Ports: 2

Water Hammer Use on pressure faucet and brewers with back flow valve

• Pre-Set: 50 PSI • Number of Outlet Ports: 2

183-150NF w/o Fittings Inlet/Outlet 1/2”NPT

Part No. WH4F WH4C WH6C

Size

1/4”Male Flare

WH4F

1/4” Comp 3/8” Comp

• Adjustment Range: 10-100 PSI • Number of Outlet Ports: 1 • Max Inlet Pressure: 200 PSI

334G Pressure

In-line Pressure Reducer Regulates high pressure or spikes to a +/- 10% 42 PSI Inlet/Outlet 1/4” quick connect. Flow rate1.5GPM at 100 PSI. Burst pressure: 450 PSI. Max working pressure: 150 PSI In-line Pressure Reducer Regulates high pressure or spikes to a +/- 10% 42 PSI Inlet/Outlet 1/4” quick connect. Flow rate1.5GPM at 100 PSI. Burst pressure: 450 PSI. Max working pressure: 150 PSI

Regulator w/Gauge Inlet/Outlet 3/8” FPT WR26 Inlet/Outlet 1/4” FPT

PRV42Q

• Adjustment Range: 10-125 PSI • Pre-Set: 300 PSI • Number of Outlet Ports: 1 • Max Inlet Pressure: 300 PSI

Repair Kit (used for WR26)

IPRV42

26ARK

Pressure Reducing Leak Stop Valve The Pressure Reducing Leak Stop valve is performing both leakage protecting and pressure reducing work in a device. The minimized fitting type pressure reducing valve is unified into a Leak Stop valve and reduce inlet water pressure by 40psi.

Working pressure: 150PSI Reduced pressure: 42psi +/- 10% Port type: 1/4” fitting - 1/4” fitting Shut down time: 1min. fromwater contact Part No. PRLSV

Flow rate: 1.5 GPM Working temperature: 33~104ºF Dimension: 2.7”x 2.4”x 2.9” (in) Burst pressure: 250 PSI Max working pressure: 150 PSI Tested up to 300 PSI

PRLSV

All prices in this publication are subject to change. VALVES | HOLIDAY HOUSE DISTRIBUTING

173